With the high number of traffic related accidents, injuries and deaths that occur each year, one might expect a significant level of safety regulation among car manufacturers, car repair shops and government. In general this is true, the safety standards of vehicles continues to increase, while injuries related to traffic, at least in the United States continue to decline. However, these rules and regulations apply to the overall safety of the vehicle and to and do not necessarily apply to every part of the car. When it comes to windshield, the burden falls on the consumer to make sure your windshield is properly installed.

Poor installation
There have been numerous press reports of drivers and passengers from being ejected from his vehicle following a windscreen is not in a car accident. Many times, these accidents are the result of improperly installed windshield replacements. Windshields are installed with a polyurethane adhesive that is designed to attach the windshield from its frame. The federal government sets safety standards to ensure that the supplied adhesive is strong enough to keep the windshield to explode in a collision.

The problem occurs when the installation is very fast and the adhesive, which usually has more than 24 hours to cure, remains moist and not allowed to dry completely, resulting in a weak link between the windshield and chassis. If the adhesive fails to hold the windshield, that will leave any of the effects of collision and impact of the airbag on the passenger side when it comes to bounce off the windshield, as displayed.

Contaminated Conditions
Given the sensitive nature of the tail of urethane and the importance of properly on the windshield, any contamination would result in improper installation. If you need to get your windshield replaced, make sure your auto glass shop employs and enforces standards of installation to avoid contamination of the adhesive used to attach the windshield of the car. Oil and dirt from hands can weaken the glue. Replacement windshield must be installed with rubber gloves.

Pinch welding
The solder material is emerging that “locks” on the windshields of maintenance in place within the framework of the car, is supported by a steel column that gives rigidity. The inadequate preparation of the emerging welding can result in faulty installation. In addition to ensuring that the auto glass installer keeps a clean work area, be sure to ask them what their process of preparation for the pinch weld. It is recommended that the pinch weld kept clean and free from zero. If a pinch weld is not properly prepared, can suffer from corrosion problems later that can further weaken the adhesive bond between the windshield and the car. This is a common problem with the installation of replacement windshield.

Meet your coach
Windshield safety can mean the difference between life and death in a car accident. If your car requires a replacement windshield, make sure the auto shops glass thorough investigation before making its decision. While there are safety standards established by the government, the only person who can be the application of these standards are the consumers themselves.

Bookmark and Share